News & Press

GE Security SecurePerfect 5.0 Service Pack 2

GE Security, an InterTECH Security Supply Partner in the field of security and alarm systems, has announced the immediate availability of Service Pack 2 for Secure Perfect v5. Contact InterTECH for more information on upgrading to Service Pack 2.

Service Pack 2 for Secure Perfect v5 delivers software enhancements and defect resolution for the following:

Support for HDS Cybermation (High Density Matrix Switcher)
Fix--transmission of PTZ camera commands to GE DVMRe Triplex
Fix--DO not resetting when DO Groups assigned to a logical alarm (Lost/Invalid Badge) are Purged/Acknowledged for reader DOs or if DO has On-time of 0
Fix--incorrect Badge Description displayed on Badge Form if Arabic characters used
Fix--intermittent failure on multiprocessor computers where after closing and reopening the alarm monitor, it may display alarms that were previously acknowledged or purged as not being acknowledged or purged
Fix--for European operating systems where the time reported by the microcontroller may be incorrect, even if the host and microcontroller are in the same time zone
Fix--communications error with certain Pelco CCTV devices due to protocol change
Fix--workstation performance degradation due to 100% CPU utilization when live video from multiple DVMRs are simultaneously played
Fix--behavior between daily and continuous for "T&A First In Last Out" report
Fix--facilities filtering with "email on alarm"
Fix--memory leak when turning microcontroller online and offline

Service Pack 2 for Secure Perfect v5 includes firmware v5.0.04:

This version of firmware is supported on all Secure Perfect v5 systems and includes the following enhancements and/or defect resolution since v5.0.00:

i. Originally part of Service Pack 1

Fix--DO remains latched after a forced door alarm is triggered followed by a REX condition or valid badge
Support for US Robotics PCMCIA modem on M5 PXN CPU card
Low Battery alarm feature available on M2000 with a host registry
Added custom format support on WIU for 26-bit, 32-bit, Hughes35, Hughes37 and 4001
Fix--corrected Flashtool reporting "No Application Code, Checksum = 000000"
ii. New in Service Pack 2

Fix--order in which Alarm / Reset messages are processed after reconnecting to an offline microcontroller, re-ordered to comply with UL 1076
Fix--address of downstream microcontrollers intermittently not being stored correctly
Fix--undefined floor selection in history records causing erroneous conclusions by host
Support for two consecutives Zone Arm / Disarm requests without an intervening badge transaction
Fix--intermittent corruption of issue date field during badge learn transaction
Fix--clearing of APB status upon host initiated request for Clear All APB function
Fix--AC Power Fail and Tamper alarm reporting incorrectly immediately after power up or reset
Fix--AC Power Fail and Tamper alarm count reporting incorrectly in the alarm monitor
Fix--printer routing on elevator readers
Fix--elevator reader failing to operate when numerous updates to Access Rights executed
Fix--Force alarm reported as Held alarm when DI alarm sense value is non-zero
Support for Billionton PCMCIA network card
Fix--now able to open door when reader is set for armed intrusion zone

Back to March 2006 Archives
Back to News Archives Main
Back to News Main